N2S
The N2S is an economy 802.11n/g/b outdoor AP/CPE operating in the 2.4GHz band. With one internal directional antenna it offers a maximum connection rage of 150Mbps. It can operate as an Access point / Access Point Router, Client or Client Router. It supports WDS for point to point links.
It has a built-in 10dB gain directional antenna and WAN + LAN Ethernet ports. The N2 supports passive Power Over Ethernet, and is supplied with a mains powered 15V POE adaptor. with NZ plug power cable.
The N2S can be easily mounted to a pole with ty-raps, or an optional adjustable stainless steel mount is available.
Require: 2 x CAT5e or better cables for installation; from indoor network / switch to POE adaptor and from POE adaptor to N2.
The N2S is supplied in plain packaging and without printed instructions. Configuration is via a web page accessed at the default IP address of 192.168.2.1. The user manual may be downloaded from the link below.
Downloads
|
Model |
N2s |
|
CPU |
Atheros AR9331 |
|
Flash |
8MB |
|
RAM |
32 MB |
|
Interface |
2 x RJ45 & 1x Reset |
|
Antenna |
Integrated 10dBi antenna |
|
Data-Rate |
150Mbps |
|
Sensitivity |
11b: -93 |
|
11g: -87 |
|
|
11n: -84 |
|
|
Operation Mode |
AP Bridge |
|
AP Router |
|
|
Client Bridge |
|
|
Client Router |
|
|
WDS Bridge |
|
|
Software |
Site Survey |
|
Bandwidth Control |
|
|
SNMP v1/v2 support |
|
|
adjustable output power |
|
|
Distance Adjustment |
|
|
Radius (802.1x) |
|
|
Mounting |
Pole Mount ( Standard) |
|
Adjust Angle Mount (Option) |
|
|
PoE |
15V 0.8A PoE |
|
Size |
275 X 93 X 45 (mm) |
|
Weight |
300g |