Hornet-U-64
PCB as used in the Alfa AP121U/64 Router. This board is based on the Atheros AP121 reference design. This is the later version PCB with 16MB flash / 64MG Ram.
OpenWRT is available for this board and currently requires loading via TFTP over the serial port (serial level shifter adaptor required).
Procedure for loading OpenWRT: here.
Note: Do not connect the VDD pin if not using the Alfa Console adaptor. Commonly available USB / Serial adaptors will supply 5v to the VDD pin and this will damage the Hornet PCB - with these devices it is only necessary to connect the RX, TX and GND connections.
Model |
Hornet-U-64 |
|||
Chip
Set |
Atheros
AR9331 |
|||
Frequency |
2.4GHz |
|||
Interface |
2
x 10/100 Ethernet RJ45 |
Antenna |
1
x I-PEX connector |
|
1 x USB |
||||
Flash/SDRAM |
16M/64M |
|||
TX
Power |
802.11b: 18.5± 1 |
RX
Sens. |
802.11b: -93± 1 |
|
802.11g:
18.5± 1 |
|
802.11g:
-87± 1 |
||
802.11n: 18.5± 1 |
|
802.11n: -87± 1 |
||
PoE |
12V
Passive PoE |
|
||
GPIO |
GPIO0 |
WLAN LED |
||
GPIO1 |
USB
LED |
|||
GPIO11 |
System reset Button |
|||
GPIO12 |
WPS
Button |
|||
GPIO13 |
LAN LED |
|||
GPIO17 |
WAN
LED |
|||
GPIO18 |
Watch DOG buffer control |
|||
GPIO22 |
Watch
DOG Clock |
|||
GPIO27 |
WPS LED |
|||
Hornet-U-64 Atheros AR9331 Routerboard
- Brand: Alfa Network
- Product Code: Hornet-U-64
- Availability: 2
-
$69.00
- Ex Tax: $60.00