Ferrite Toroids, Beads
Ferrites are made to different component formulas ( typically known as mix's ), to provide desired characteristics. There is no magic "one type fits all". Below is a table that provides a guide to some of the common mixes used in Ham Radio, and the use / frequency range over which they are most applicable. The 'mix' numbers are "Fair-Rite" brand - other manufacturers may use identical mix numbers but the product characteristics may differ.
| Mix # | EMI Suppression | Transformer | Comment |
| 31 | 1-300 MHz | 1:1 only, < 250 MHz | Ideal for antenna feedline chokes at lower HF Ham bands. OK for current baluns - not suitable for voltage baluns other than 1:1. |
| 43 | 25-300 MHz | 3-60 MHz | Generally more economic that mix 31, but suited to higher HF Ham bands when used as a common mode choke. |
| 61 | 200-2000 MHz | 1-300 MHz | Lower loss therefore useful for voltage transformers where power is transferred via magnetic flux |
| 73 | 0.1-10 MHz | < 10 MHz | Low frequency EMI suppression - good choice for SMPS noise reduction. |
| 75 | 0.15-10 MHz | 0.1-10 MHz | Good choking impedance at low frequencies - good choice for SMPS noise reduction. |
Refine Search
Ferrite Core, Clip On, Mix 31, 4.3mm ID
Clip-on split core suitable for cables upto 4.1mm ODMix 31 offers useful EMI suppression in the HF a..
$3.22 Ex Tax: $2.80
Ferrite Core, Clip On, Mix 31, 5mm ID
Clip-on split core suitable for cables 3mm to 4.9mm ODMix 31 offers useful EMI suppression in the HF..
$3.68 Ex Tax: $3.20
Ferrite Core, Clip On, Mix 31, 0.25" ID
Clip-on split core suitable for RG58 Coaxial CableMix 31 offers useful choking in the HF and lower V..
$5.68 Ex Tax: $4.94
Ferrite Core, Clip On, Mix 31, 0.5" ID
Clip-on split core suitable for RG8 / LMR400 Coaxial CableMix 31 offers useful choking in the HF and..
$8.05 Ex Tax: $7.00
Ferrite Core, Clip On, Mix 31, 0.388" ID
Clip-on split core suitable for 9mm dia cableMix 31 offers useful choking in the HF and lower VHF am..
$5.20 Ex Tax: $4.52
Ferrite Core, Cylinder, Mix 31, 0.687" OD, 0.375" ID, 1.125" Length
Fair-Rite p/n 2631665702Offers useful choking impedance at HF through VHF frequencies for a single t..
$3.60 Ex Tax: $3.13
Ferrite Core, Clip On, Mix 31, 1.0" ID
Clip-on split core suitable for multiple turns of mains cables, 4 turns of RG213 etc. Choking ..
$30.00 Ex Tax: $26.09
BN-43-202
Binocular Ferrite Core, Mix 43Width: 13.3mm (0.525"), Length: 14.35mm (0.565"), Height: 7.5mm (0.295..
$1.97 Ex Tax: $1.71
BN-61-202
Binocular Ferrite Core, Mix 61Width: 13.3mm (0.525"), Length: 14.35mm (0.565"), Height: 7.5mm (0.295..
$2.39 Ex Tax: $2.08
BN-73-202
Binocular Ferrite Core, Mix 73Width: 13.3mm (0.525"), Length: 14.35mm (0.565"), Height: 7.5mm (0.295..
$1.80 Ex Tax: $1.57
FT-114A-31 Ferrite Toroid, 1.14" OD, 0.748" ID, 0.545" High
The FT-114A-31 has an increased height over a FT-114-31. This increased ferrite volume for the..
$4.70 Ex Tax: $4.09
FT-240-31, Ferrite Toroid, 2.4" OD, 1.4" ID, 0.5" High
Fair-Rite p/n 2631803802 Mix 31 Toroid, commonly known as FT-240-312.4" size suitable fo..
$13.80 Ex Tax: $12.00
BN-43-2402
Binocular Ferrite Core, Mix 43Width: 7mm (0.276"), Length: 6.2mm (0..244"), Height: 4.2mm (0.16")Hol..
$0.62 Ex Tax: $0.54
FB-43-0301 Ferrite Bead, 6mm L x 3.5mm OD x 1.3mm ID
Ferrite Bead for upper HF ~ VHF EMI suppression.Typically used for installation on PCBs.ID at ..
$0.08 Ex Tax: $0.07
FB-43-2402 Ferrite Bead, 0.38" OD, 0.197" ID, 0.19" High
Ferrite Bead for upper HF ~ VHF EMI suppression.Typically used in multiple bead strings on SMP..
$0.45 Ex Tax: $0.39